Cowon iAUDIO CW200 User Manual download pdf (Page 19)

CW200

13. Troubleshooting

Ⅰ

iAUDIO doesn’t operate

Check that the battery’s polarity is correct.

Check the voltage of battery.

(If battery is out, the player won’t work.)

Take out the battery for a short while and reinsert.

The buttons of iAUDIO don’t work.

Check if the HOLD switch is switched OFF.

(Buttons are inoperative when HOLD switch is ON.)

No sound is heard after pressing the PLAY button.

Check that there are MP3 files in flash memory.

Cannot connect to PC or file download doesn’t work.

Check that the power of iAUDIO is ON.

Check whether the USB cable is correctly connected.

Check the USB device in the PC whether it is correctly installed.

Cannot read files from flash memory

Format the built-in flash memory using JetShell and try again.

Checking Firmware version

To receive customer support, you must check the firmware version.

When power is turned on the number that appears in the position

where elapsed time is indicated is the version of Firmware.

Low reception rate of FM Radio stations

Receiving capabilities of FM Radio stations are susceptable to your location.

How to reset iAUDIO to factory default settings.

While pressing the MENU button and REC button, press the PLAY button to turn on power.

MENU and REC buttons must be pressed until iAUDIO is completely turned on.

When you have troubles with the iAUDIO, check the following firsts.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 43 44

No comments

Cowon iAUDIO CW200 User Manual Page 19